Teslacigs Invader 4X Kit-Made of PC and ABS

On March 6, Teslacigs presented a new device in its instagram – Tesla Invader 4X. This is a box mod with the ability to control voltage, running on two 18650 batteries and issuing up to 280 watts.

The updated version of Invader 4, the creators explained, was made on the basis of “market reviews”. What specifically, apart from the design, the new product differs is not quite clear. From the “innovations” – the lack of support for batteries of the format 21700 or 20700 and the plastic case. This technical difference ends; in the official instagram, the work on the update was called “the design of the ideal product”.

Vape Starter Kit, Wholesale E Cig Starter Kits – AVE40

Main characteristics:

  • Voltage – from 3 to 8 volts
  • Food – 2х18650
  • Dimensions – 88 by 52 by 26 mm

Invader 4X MOD

Dimension: 88 x 52 x 26mm

Material: PC+ABS

Cell Type: 2x Hi-drain 18650 cells(discharge current should be above 40A, not included)

Maximum Output Wattage: 280W

Voltage Adjust: I-V level

Output Voltage Range: 3~8V

Maximum Output Current: 53A

Resistance Range: 0.08Ω-3.0Ω

Input Voltage Range: 6.4V~8.4V

USB: 5V/1.5A

LED light Indicator: Blue-Green-Red

Protections: Over puffing protection/Reverse connection protection/Atomizer short-circuit protection/Low voltage alert/Overheat protection/Over-current protection

Invader 4X RDA

Top Vape Tanks, Vape Atomizer, Clearomizer Online | Ave40

Dimension: 25 x 34mm

Post holes: 1.5 x 3.0mm

Drip tip: Resin wide bore drip tip

Thread: 510

Tesla Invader 4X VV Kit

Package Included:

1x Invader 4X MOD

1x Invader 4X RDA

2x Wires

3x Silicone Rings

1x Wrench

4x Screws

1x Organic Cotton

1x Data Cable A

2x User Manuals

1x INVADER 4X Kit Package

Tesla Invader 4X VV Kit

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Teslacigs Invader 4X Kit
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Hellvape Dead Rabbit RDA

THC Tauren RDA

Voopoo Drag Nano Kit

OUMIER Armadillo RDA

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Voopoo Finic 20 AIO Kit Review

Well, summing up the theme of the new products from the company Voopoo, I introduce you to another starter kit. As you have noticed, this instance is configured more seriously than the previous one. Probably, I will not detain you much, because the copy turned out to be quite simple. Especially if you read the previous article, you will notice that some elements of new products have something in common. However, the difference between them is obvious. 

Voopoo Finic 20 AIO 
Voopoo Finic 20 AIO - a little thicker, more powerful and more autonomous ...
Dimensions: 117 x 20mm 
Weight: unknown 
Case material: stainless steel + plastic 
Power: built-in 1500 mAh 
Chipset: GENE. chip 
Cartridge capacity: 2ml 
Evaporator resistance: 0.6 / 1.2Ω 
Output power:6 – 22W 
Voltage range: 3.2 – 3.7V 
Operating mode: POWER 
Protection: from low / high resistance, from overheating, from short circuit, from recharge / overdischarge 
Screen / diagonal: no 
Micro-USB port / charging: yes, charging current unknown 
Color: see photo below 

Vape Wholesale Supply,Vape Wholesale China – AVE40
Voopoo Finic 20 AIO - a little thicker, more powerful and more autonomous ...
Package
contents – Finic 20 AIO mod 
– 2pcs replaceable evaporator YC-R1 0.6Ω / YC-R2 1.2Ω (one preinstalled) 
– replacement oringas 
– spare glass 
– USB cable 
– user manual 
– warranty card
Voopoo Finic 20 AIO - a little thicker, more powerful and more autonomous ...
This guest of ours is a little more pleasant than the previous one, but except for the motley prints, perhaps, to catch the eye and not for anything. Quite possibly this is a plus, for the presence of vulgar decor in this segment is completely useless. It is larger, but in height it is still the same 117 mm. 

Vape Pen Starter kit, Wholesale AIO Vape Kit Vaporizer Kits – AVE40
Voopoo Finic 20 AIO - a little thicker, more powerful and more autonomous ...
The developers have especially tried to design this model. Therefore, in addition to the standard color options, bright prints are also available from the start. And what, youth, modern – in spring. 
Voopoo Finic 20 AIO - a little thicker, more powerful and more autonomous ...
And again we see the praised drip type. Probably he really will be a convenient instance. 
Voopoo Finic 20 AIO - a little thicker, more powerful and more autonomous ...
Screw cap again, metal thread. Holes for refueling pair, but seem quite small. The capacity, by the way, is exactly the same – small.
Voopoo Finic 20 AIO - a little thicker, more powerful and more autonomous ...
Two types of coils are presented as replaceable evaporators. The developers are positioning them for MTL and DTL. However, at the same time, we notice the already familiar grilles of air intake openings on the main body without the possibility of adjusting the blowing. Somehow it does not fit one with the other. It is possible that we do not know something, but the purely visual adjustment of the blower is not detected. 
Voopoo Finic 20 AIO - a little thicker, more powerful and more autonomous ...
Built-in battery in this set is almost twice the size of the previous model in capacity. This is good, but the developers are again silent about the current of its charging. The button is a fayer of medium size, surrounded by an LED indicator. 
Voopoo Finic 20 AIO - a little thicker, more powerful and more autonomous ...
Naturally, this device is more powerful and autonomous, and accordingly more dimensional and expensive. 

Price $ 28 
Voopoo Finic 20 AIO - a little thicker, more powerful and more autonomous ...

Click Here Ave40  For Vape Wholesale Cooperation.

Now It’s Available: Voopoo Finic 20 AIO Starter Kit
Hot Sale Recommendation:

Vaporesso Aurora Play Zippo Pod Starter Kit

Justfog Compact 14 Starter Kit

Rincoe Mechman Mesh Kit

Voopoo Drag Nano Kit

Voopoo Drag Baby Kit

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Smoant Karat Vape Pod Kit Review

The appearance of salt nicotine and liquids based on it on the vap market made a small “revolution”, as it not only changed the vapors’ taste preferences, but also required the appearance of new devices. Naturally, such devices began to appear almost immediately – these are closed-type systems or POD-systems, the main feature of which is not abundant vaporization, but the most rapid delivery of nicotine to the body. In order to find a niche in this market segment, almost all manufacturers began to produce such systems, somehow trying to surprise users with functionality or design. The Smoant developers managed to simultaneously combine both the functionality and the original design in the Karat POD system, which sits nicely in the hand, equipped with an innovative quartz evaporator and a quite decent battery.

General information

Karat Pod Kit by Smoant is a fairly overall POD system made of metal, equipped with a built-in battery and working on replaceable cartridges in which quartz evaporators are installed. Designers of the company did not make a miniature system, paying more attention to appearance, but do not think that the system is very large – it fits perfectly in hand. The use of quartz evaporators allows not only to maximize the taste of the liquid, but also significantly prolongs the life of the cartridge. The company Smoant offers a device in five colors, both classical and bright colors – bronze blue, black, steel-gray, rainbow and blue gradient.

Equipment

It is fair to say that waiting for something unusual from the POD system is stupid, since it is already one of the simplest variants of vape devices. Therefore, in the box you can find only:

  • Karat Pod Kit;
  • USB cable;
  • User manual in several languages.

Appearance and design

The very name of Karat Pod Kit by Smoant hints at how the device belongs to the jewelry theme. It is therefore not surprising that it is made in the form of some kind of faceted crystal or precious stone. It is difficult to say at once who exactly the device is designed for, as the design is rather ambiguous, but at the same time 100% eye-catching. Taking into account the fact that color performances are diverse, you can get a device that not only allows you to float liquids based on salt nicotine, but also becomes a full-fledged element of style and image.

It cannot be said that the Karat Pod Kit by Smoant is different in its miniature size – it is much larger than “felt-tip pens” or “thermometers,” but at the same time it fits perfectly in the hand, both in male and female. This device is made of zinc alloy with plastic inserts, because of which its weight is rather big, but not critical.

The built-in 370 mAh battery allows (as the manufacturer claims) to make 220 full puffs with a full charge without loss of taste, which is good enough for such a device. Charging is performed using a micro-USB connector located on the side of the device. An important feature of charging is that it is 0.5A and the battery is fully charged in an hour and a half. 

Evaporator and features of use

In Karat Pod Kit by Smoant, replaceable cartridges are used, which is quite natural for such devices. But, in contrast to evaporators from other manufacturers that use cantal or nichrome as a heating element, Karat uses quartz heating elements. This technical solution allows you to maximize the taste and significantly extend the life of the cartridge. The evaporator resistance is 1.3 ohms and 3.4 volts are fed to it.

If we talk about tightening in the Karat Pod Kit by Smoant, then it is tight enough that a fan of cigarette puffs will especially like. Activation occurs automatically – when tightening. Refilling the cartridge is as simple as possible – it is removed, turned over, two silicone plugs are lifted, and 2 ml of liquid is poured (it is advisable to use bottles with a thin metal spout, since the filling holes are small).

Conclusions and impressions

We can confidently say that the Karat Pod Kit by Smoant is an interesting device, not only for its design, but also for its performance characteristics. The device will not only calmly float liquids on salt nicotine, but also become an image element of the modern city dweller.

Advantages and disadvantages

disadvantages

  • Relatively large size and weight;
  • Charging only current 0.5 A.

Virtues

  • Original design;
  • Greater autonomy;
  • Sufficient cartridge volume;
  • Simple refueling;
  • The service life of the heating element is extended;
  • The ability to use lanyard for wearing around the neck or arm.

Smoant Karat costs $25.49

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, Trusted Vape Wholesale Supply by VapeShops Owners.

WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html

Read The Stunning SMOK Stick V8 Review!

SMOK seems to have been postponed after releasing its latest mod [the Skyhook] but personally, I had my eye on something new coming soon. The SMOK Stick V8 kit is the latest sub-ohm pen device produced by one of the most popular companies out there.

SMOK V8 kitSMOK V8 kitSMOK V8 kitSMOK V8 kitFocus On www.ave40.com For More Vape Kits.

SMOK Stick V8 Review

Features & Specifications

Battery Specifications & Features Big Baby TFV8 Specifications
Dimensions: 24.5 * 75mm Size: 56 * 24.5mm
Capacity 3000mAh battery Container volume 5.0 ml
Voltage range: 3.4 V – 4.2 V Stainless steel construction
Battery LED indicator Glass container section
Stainless steel construction Adjustable air flow
Spring pin 510 Pointe drip Delrin wide bore
Micro USB port (charging) Top tamping machine
Long Battery life of 3000 mAh 5 ml Capacity
No screen or settings – only load and go for a Vape
Great taste and clouds

Kit content:

  • Battery 1 x V8 stick (3000mAh)
  • 1x TFV8 Big Baby Tank 24.5mm
  • Baby M2 V8 1x base 0.15ohm
  • V8 core 1x M2 baby-0.25ohm
  • 1x USB connection
  • 1x manual
  • 1x Band of Vape
  • 1x spare parts

First Impression

The kit comes with black cover box with all the information on the back written on it. However, SMOK M2 baby coils specifically designed for the V8 stick battery pump discharge 20 amps are consistently designed. Using Ohm readings on them and the kit I received were of 0.15ohm and 0.25ohm. You will be happy to know that each baby TFV8 beast is coils supported.

Power/Performance

The quality design is just beyond the perfections. The connections are clean and smooth like butter with the large ring of airflow and have a fairly good resistance when moving. The design is a cookie-wise and very similar to a Brit and SMOK Vape Pen 22. It is thick and chunky. I got the black version and really look like a top model. It also comes in stainless steel and the finest color is a rainbow. The charging connector is on the side with a small LED dots that will let you know when your device is fully charged.

The power button is very “Clicky” and flashes every time you puff and if it blinks 15 times then it means the voltage is below 3.3V. Oh man, I loved seeing this beauty! The battery seems unlimited and that the tank is crazy to run! The clouds are awesome with the sensational taste. Baby V8 double coil base M2 0.25 ohms had given me an excellent Vape – I think it was cool, but lukewarm curls and the taste was a revelation – great. This is an absolute monster – WOW! It is a rugged device that I could think of taking a few bumps and fits comfortably in your hand and feels strong enough.

Pros & Cons

Pros Cons
8 Seconds Shut Off Honestly, I’m little confused about the Cons
because I didn’t find anything. But maybe it was a little noisy.
Low Resistance Protection
Protection Against Short Circuit
Low-Voltage Protection
Easy filling
Easy coil changing
Crazy clouds and good taste

Long story short – Summary

I will keep this simple. This is the best stylish pen under ohm device that I’ve had the pleasure of checking. And no, I am not paid to say anything here but the battery is incredible. The tank is good in performance and has a great taste to enjoy. It was easy to handle and the design was awesome.

Focus On www.ave40.com For More Latest Vape News.

Now It’s Available : Smok Stick V8 3000mAh Kit with TFV8 Big Baby

Hot Sale Recommendation:

Smok Nord Pod System Kit

Vaporesso Aurora Play Zippo Pod Starter Kit

SMOK Mico Pod Kit

OUMIER WASP Nano RTA 

Voopoo X217 Box Mod

Sinful Fuchsia: Wismec Sinuous V200 TC Kit

Wismec has released the Sinuous V200 Kit. It consists of a lightweight 200-watt plastic box mod and an Amor NSE tank with the option to install a “cigarette” blow.

On January 3, Wismec introduced the Sinuous V200 Kit on Instagram  . The choice offered four colors, two of which involved very atypical colors. The boxmod was given a rectangular silhouette with cut corners, a kind of elongated octagon. Lightweight body made of plastic. The ends complemented the panels with “honeycomb” textures, one of them received the role of a removable battery cover. A standard set was placed on the front side – a round fire button, a simple display, two control keys and a USB port.

The device requires a pair of 18650 batteries for operation; when charging via USB, the current should not exceed 2A. Output power reaches a value of 200 watts, you can also work in temperature mode. The minimum resistance is 0.05 ohms.

The Amor NSE tank, familiar from the previous sets, is completed with two types of replaceable evaporators for 0.27 and 1.3 Ohms, for free and “cigarette” puffs. Adjust the airflow to your taste allows the ring on the base of the device. The flask holds 3 or 2 ml, the opening for refueling is hidden under the shifting topkep.

The package includes two evaporators, USB-cable repair kit and instructions.

Main characteristics:

  • The size of the set is 135.3 by 53.2 by 25 mm
  • Weight – 115.2 g
  • Maximum power – 200 watts
  • Resistance from 0.05 to 3.5 ohms
  • Meals – 2х18650
  • Tank capacity – 3/2 ml

Focus On www.urvapin.com For More Latest Vape News.

Now It’s Available : Wismec Sinuous V200 TC Box Mod with Amor NSE Tank

Hot Sale Recommendation:

Smok Nord Pod System Kit

Vaporesso Aurora Play Zippo Pod Starter Kit

SMOK Mico Pod Kit

OUMIER WASP Nano RTA 

Voopoo X217 Box Mod

VANDY VAPE KYLIN MINI REVIEW

FIRST IMPRESSION OUT OF THE BOX:

I’ve always been into single coil tanks and RDA’s. So when I heard Vandy Vape was working on a mini version of the Kylin, I was definitely excited about it. When I opened the box, I have to say that I was quite impressed with it as soon as I put it in my hand. When I unscrewed the base and saw that deck, it just looked awesome to me. Just by the way it’s built and the curvature of where your coil is being held scream flavor as soon as you take a look at it. I can’t wait to put a coil in it and see how it actually vapes.

WHAT’S IN THE BOX:

  • One Vandy Vape Kylin RTA
  • One Chimney Extension
  • One Spare 2ml Glass Section
  • One 6ml Glass Section
  • Drip Tip Set
  • One Hex Key
  • Spare Part Pack
  • User Manual

Vandy Vape Kylin Mini Review

Focus On www.urvapin.com For Best Vape Tanks.

 

FROM TOP TO BOTTOM:

The Kylin Mini comes with a beautiful, Goon-style, resin drip tip pre-installed. The resin drip tip is on the tall side and it does a really good job of keeping your lips off of the top cap. The resin drip tip has an 11 mm bore. The other included drip tip is a black Goon or 810 style drip tip. It has ribbing going around the outer circumference of it. The ribbing provides some texture and it is also extremely comfortable. It is shorter than the resin drip tip for those vapers that like a shorter, chuff style, type of drip tip. The black drip tip has a 10 mm bore.

Vandy Vape Kylin Mini Review

For those of you that still like to run your traditional 510 drip tips, there is a 510 drip tip adapter included with your purchase of the Kylin Mini RTA. That is the one thing I always like about purchasing Vandy Vape atomizers, they always give you a bunch of choices when it comes to DT’s.

Vandy Vape Kylin Mini Review

With your Kylin Mini, you will receive 2 tank glass sections. The pre-installed one is a straight glass and it has a capacity of 3 mls. The extra glass section is a bubble style glass and it has a 5 ml capacity. The bubble glass option allows you to expand the capacity of your tank without having any negative effect on flavor. Both tank sections are made out of Pyrex glass. I really have no use for the 3ml glass section. I would have appreciated it if the spare glass was just another bubble glass section. I do understand why Vandy Vape packaged it like that, not everyone likes the bubble glass look. I just really like the extra capacity.

The top cap on Kylin Mini has some beautiful knurling on the exterior. It is a very heavy knurling that gives you a great grip on the top cap when refilling the tank. There is also some Vandy Vape branding on the top of the top cap. There is a little bit of a raised platform with an o’ring inside to secure your Goon or 810 style drip tips. Even though there is a platform, most of your aftermarket drip tips should still look good on the Kylin Mini. On the interior of the top cap, there is an o’ring along with some beautiful threading that provides a snug fit when it is screwed onto the top fill port cap. As always with Vandy Vape, the machining is top notch.

Vandy Vape Kylin Mini Review

With the top cap off, there are two very big half circle-shaped fill ports. These fill ports will accommodate any type of juice bottle on the market today including the bullnose types of bottles. The chimney is a medium bore chimney, that is definitely geared more towards flavor. The chimney drops down to an extremely conically shaped barrel. On the exterior of the barrel, there is a Vandy Vape logo and some Kylin branding. The barrel attaches to the base with some very smooth threading.

Vandy Vape Kylin Mini Review

On the bottom interior of the base, there is a thick o’ring that does a great job of keeping the glass in place as well as ensuring against any leaking. The AFC ring around the circumference of the base has some knurling on it that allows the user to get a good grip to adjust the AFC ring. The airflow on the base is cyclops style and fully adjustable. The airflow slots measure 15 mm by 2 mm. The action on the AFC is nice and smooth with stoppers on both ends. On the bottom of the base, there is some Kylin and Vandy Vape branding as well as a serial number. The base measures 24 mm in diameter and with the bubble glass installed, the Kylin Mini is 26 mm in the middle.

Vandy Vape Kylin Mini Review

The 510 connection on the Kylin Mini is gold plated and slotted for a flat head screwdriver. It is surrounded by an insulator ring and some stainless steel threading. The stainless steel threading on the base is very smooth and this atomizer should sit flush on all of your mods. On the bottom of the Kylin Mini, there is some Kylin Mini branding as well as a serial number.

THE DECK:

The whole deck on the Kylin Mini is 25 karat gold plated. This is a single coil only deck and its main objective is flavor. The deck has a cradle-like shape to it, with a honeycomb airflow design. The shape of the deck actually cradles your coil for superior flavor. It is like a slot that is designed specifically for a coil and it takes the airflow from all sides of the coil. It’s a very impressive design. There are 7 rows of 3 airflow holes on your deck, for a total of 21 holes. These holes create an extremely smooth airflow and they make any flavor that you put in this atomizer pop. Vandy Vape calls it their honeycomb design.

Vandy Vape Kylin Mini Review

This is a postless style deck with Philips head M4 screws that are accessed from the side. The spare deck screws are hex grub screws and there is an included Allen key. The screws are very nice and of high quality. The screws are also gold plated and they are beautifully threaded. This type of deck makes building and coil placement extremely easy. The wicking ports are located on each end of the deck. This is also an extremely easy atomizer to wick.

Vandy Vape Kylin Mini Review

BUILDING AND WICKING:

Building on the Kylin Mini is a breeze. It’s a postless deck so the toughest part is getting the correct lead length. Here is a pro tip, take your drip tip and measure the lead against the skinny side of the drip tip. Clip your lead where the drip starts to get fat. This will give you the perfect length for your leads. Now, all you have to do is drop your coils in the terminals and tighten up those big deck screws.

Wicking is straightforward as well but it can be a little on the tricky side. You really have to take care and make sure your wick is the correct length. If it is too long, you will get a dry hit. Definitely better for your wick to be on the short side as opposed to the long side. I like to cut my wick about 1 mm off of the bottom of the deck. In fact, when you put the tank back together, if you can see your cotton thru the wicking ports, your wicks are too long.

HOW DOES IT VAPE?

This is one of my favorite single coil atomizers of the year so far. In fact, I like to think of this tank as a single coil Kensei. That is exactly what it reminds me of with the deck and the vape quality that I get off of it. It has that same honeycomb style deck that the Kensei has and it gives me that same type of flavor only on a single coil instead of a dual coil setup. The flavor on this atomizer is absolutely banging. You are going to get one of the best single coil vapes that you have ever gotten off of this tank. It is extremely flavorful. The clouds on it are plentiful as well. Most people are not going to believe you when you tell them you are chucking those clouds from a single coil atomizer.

Right now, I have a SS Framed Alien in the Kylin Mini ohming out at .28 ohms. I have it set at 60 watts and the vape I get off of it is just beautiful. The clouds are definitely there and so is the flavor. This is a flavorful tank and a surprisingly cloudy tank especially when you consider I’m only running one coil.

WHAT WOULD HAVE MADE IT BETTER:

  • Airflow Is A Little Loud

The airflow on the Kylin Mini is very smooth and I have to say that I do like the range of airflow that it provides. It’s definitely a DL tank and you will get a nice range of a restricted DL hit. There really is no way to MTL vape on this tank. While the air flow is very smooth, it can get just a little noisy. I would have liked to have seen Vandy Vape smooth the airflow out a little bit, as far as the noise goes. It’s not noisy to the point where it’s a deal breaker but it definitely does get a little loud and it has to be mentioned.

CONCLUSION:

Most of you that read my reviews know that I tend to really like single coil atomizers. I just find that most of the time, I get very good flavor while using a little more than half the wattage I normally would on a dual coil build. Single coil tanks also tend to be much more efficient because you use a lot less juice running only one coil and you get better battery life because you are using less wattage. The Kylin Mini by Vandy Vape is definitely one of the better single coil tanks I have vaped in quite some time. In fact, this one is probably going to be in my rotation for quite some time now, because I really can’t see anything coming along and knocking it out. It’s a great single coil RTA and it has my highest DeucesJack approval. If you’re into single coil tanks, you’re definitely going to want to pick yourself up a Kylin Mini by Vandy Vape.

Now It’s Available :

VandyVape Kylin Mini RTA Tank

Hot Sale Recommendation:

Smok Nord Pod System Kit

ijoy shogun kit

ijoy shogun univ

ijoy shogun mod

smok stick v9

Coilart Mage Mech V2.0

Hotcig RSQ squonk mod – “great”, but give the price!

Another collaboration gave birth, in my humble opinion, to a rather decent device. The participating parties are Hotcig and RigMod WW. And they brought to light the skvonk box, managed already proven only from the positive side, waterproof HMchip. So, meet godnota in an ultra compact size Hotcig RSQ squonk mod – I had nothing to do, so says the manufacturer))) 
Hotcig RSQ squonk mod - great, but give the price!
Dimensions: 79 x 25.5 x 48mm 
Weight: Unknown (according to the materials used, will be too heavy) 
Case Material: Zinc Alloy 
Capacity bottle: 7ml 
Power: 1 x 18650 
Chipset: HMchip powered by Hotcig 
Output power: 1 – 80W
Voltage range: 0.5 – 7.5V
Operating mode: POWER, TC (NI200, SS, TI), TCR, BYPASS
Temperature range: 200 – 600 ℉ / 100 – 315 ℃
Supported resistance: 0.1 – 3.0Ω (presumably)
Protection: from low / high resistance, from overheating, from incorrect polarity, from short circuit, from overcharging / overdischarge
Connector type: steel 510, pin gold-plated, spring-loaded
Screen / diagonal: yes
Micro-USB port / charging: yes, charging current 1A
Update / firmware: yes
Color: black, steel, red, blue
Hotcig RSQ squonk mod - great, but give the price!
Options
– RSQ squonk mod
– 2pcs silicone bottle (one is preinstalled) 
– USB cable 
– user manual 
– warranty card 

Immediately as regards dimensions. I did not have much time to dig deeper, as it should, but, offhand, it really is one of the most compact managed skonk boxes on the market. So Respect, as they say. 
Hotcig RSQ squonk mod - great, but give the price!
Oh, I love bricks. Apparently, Hotcig chose a comrade on this principle – RigMod WW also has a similar form factor. Design, I will say right away, to my taste. Strictly rectangular box with rounded corners, side removable panels – one with a “zakos” under carbon, the other with a relief name of the model.
Hotcig RSQ squonk mod - great, but give the price!
“Advertising space” companies are divided among themselves as follows. On the side panel near the window fit the logo Hotcig, and RigMod WW got the back side of the box. 
Hotcig RSQ squonk mod - great, but give the price!
Boxing looks shot down, solid and clear. This will suit both a teenager and a serious businessman. In a word, they did their best. 
Hotcig RSQ squonk mod - great, but give the price!
The “disease” with the landing of atoms, apparently, Hotcig won. Now 24mm atomizers should sit as it should. 
Hotcig RSQ squonk mod - great, but give the price!
The control panel looks great. We didn’t bother with the fire button, retained the old outlines, only increased the diameter – excellent.
Hotcig RSQ squonk mod - great, but give the price!
The window for clicking on the bottle repeats the shape of the box mod and is quite stylishly inscribed in the overall ensemble of the device. Its edges have a pleasant bevel angle. Nevertheless, problems with the “light” of the battery could not be avoided. Here I am amazed, is it difficult to add a thin plastic partition in the color of the case between the bottle and the battery? It’s just elementary. 
Hotcig RSQ squonk mod - great, but give the price!
Inside, the manufacturer decided to hide almost all contact elements from the owner’s eyes. 
Hotcig RSQ squonk mod - great, but give the price!
Not without a surprise. In the internal panel, located in the vicinity of the bottle, built-in RGB lights. Good or not, judge you. But I note that it does not look miserable, as we used to see. The backlight is soft, “warm”, and not intrusive – it turns out that the bottle glows from the inside. Most likely, there is a function to disable it.
Hotcig RSQ squonk mod - great, but give the price!
I hope that both side panels are removable, otherwise troubles with picking up the battery can not be avoided, since the ribbon is not provided. 
Hotcig RSQ squonk mod - great, but give the price!

Advantages / disadvantages
+ design 
+ compactness 
+ chipset 
+ performance 
+ ergonomics
– / + price 

Now It’s Available :

Hotcig RSQ 80W Squonk Box Mod

Hot Sale Recommendation:

Smok Nord Pod System Kit

ijoy shogun kit

ijoy shogun univ

ijoy shogun mod

smok stick v9

Coilart Mage Mech V2.0

VAPORESSO REVENGER X KIT REVIEW

FIRST IMPRESSION OUT OF THE BOX:

When I first received this box, the first thing I thought was, ‘okay, I reviewed this thing already’. Turns out, Vaporesso has come out with a new and improved version of the Revenger kit. While the Revenger was a really good mod, it did have its issues. Hopefully, Vaporesso has addressed most of those issues on this rendition.

Vaporesso Revenger X Kit Review

It looks almost the same as the original Revenger but the only thing that’s different is there are no buttons on the face of the mod. Everything else is pretty much the same except the missing plus/minus buttons and the menu button. They are in fact there but not in traditional button form. Let’s load some batteries into this kit and figure it out together.

WHAT’S IN THE BOX:

  • 1x Revenger X MOD
  • 1x NRG Tank/ NRG Mini Tank (TPD Edition)
  • 1x GT4 Core (Pre-installed)
  • 1x GT8 0.15ohm Core
  • 1x Vaporesso USB Cable
  • 1x Replacement Glass Tube
  • 1x User Manual

Vaporesso Revenger X Kit Review

FROM TOP TO BOTTOM:

THE MOD:

Starting off at the top, we have a center mounted, gold plated, 510 pin. Vaporesso always uses high quality 510’s and this mod is no different. The threading around the 510 pin is stainless steel and smooth. There is a little metallic ring around the 510, but I really wouldn’t call it a platform. Love the fact that Vaporesso is one of the few companies that listens to its customers and provides mods with center mounted 510’s. It has a short throw to it and it is very stiff. So far though, all of my atomizers have sat flush on this mod. The Revenger X will hold a 25mm tank with no overhang. You actually may be able to fit a 26 mm tank with no overhang.

Vaporesso Revenger X Kit Review

The mod itself has a gunmetal finish around the edges and a glass-like look to it. Mine is gunmetal and black. There is a black plastic piece that goes around the whole center of the mod. If the screen is facing you, on the right side of the mod, we do have the fire button. The fire button is rectangular in shape with curved edges to it. It is raised quite a bit from the body of the mod. It is clicky and big with an almost lever-like look to it. When you do use it, you do have to push it towards the top of the button. If you push it on the lower part of the button, it is difficult to fire. The fire button is very comfortable to use and I am enjoying the overall form factor of the Revenger X.

Vaporesso Revenger X Kit Review

With the screen of the mod facing you, the left side of the mod is pretty much blank. On the bottom of the mod, there is some battery venting. There are four holes on each side for a total of 8. On the backside of the mod is where the battery door is located. If the battery door is facing you, on the left side of the mod, there is a little cut out for you to be able to get a fingernail in there to lift the battery door off the mod. This battery door is extremely solid and it is held in place with 3 strong magnets. The battery door does not wiggle or move in any way, shape, or form. The batteries in the battery tray are in there pretty good as well. I have experienced no battery or battery door rattle on the Revenger X Kit.

On the exterior of the battery door, there is some Revenger branding on the top of the door. On the bottom of the exterior door, there is some Vaporesso branding. Just like the front of the mod, the battery door has a very sleek look to it. It’s a glassy, glossy look that is a true fingerprint magnet. Even though it is a fingerprint magnet, this is one futuristic, sleek-looking mod. It is basically the shape of a rectangle but the edges are all curved and contoured to make sure it fits in your hand beautifully.

Vaporesso Revenger X Kit Review

The interior of the battery door has three strong magnets that coincide with 3 magnets on the battery tray. The one thing I wish Vaporesso did on the battery door was provide some sort of strip of insulation. As the battery door is now, it is all metal and that’s really not a good thing if you have some sort of tear in one of your wraps. For the sake of safety, it would have been nice if they put some type of insulator piece on the interior of the battery door.

The battery tray is extremely clean. It is held in place by 4 Phillips head screws. There are ten board venting holes near the top of the battery tray. This battery tray does not have a battery strap to it but to be honest, there really is no need for it. The batteries are exposed about a quarter of the way out, once the battery door is off. It is very easy to grip your battery from the bottom contacts, push up and slide your battery out. The battery tray has clear battery orientation markings inside of it.

On the bottom of the battery tray, the contacts are gold plated and button style. On the top of the battery tray, the contacts are spring loaded and gold plated. If the battery tray is facing you, the left battery goes in positive side down and the right battery goes in negative side down. The best way to install the batteries is to put the tops of them in first and push up against the spring loaded battery contact. This gives you enough space for the bottom of your battery to slide in rather easily. Once the batteries are installed, the mod will give you some haptic feedback to let you know that they are in there correctly.

Vaporesso Revenger X Kit Review

On the front side of the mod is where we have the .96 inch Revenger X screen. The funny thing is with the mod turned off, sometimes it can actually be hard to tell which side is the battery door and which side is the screen. Of course, the side with the screen is the one with the USB port towards the bottom of the mod. The USB port will charge your dual 18650s at 2 amps. It is also used for firmware upgrades.

On the top side of the screen, there is also some Revenger branding. Right below the Revenger branding is the OLED screen. On the screen, you will be able to see your battery life with two separate battery meters, mode, preheat, screen locked or unlocked, resistance, voltage, wattage, and a puff counter with the total amount of puffs and seconds of the last pull. The screen is bright and vivid. You can control the brightness of the screen in the menu system. Outdoors in daylight conditions, the mod does rather well. Unfortunately, it is in dark indoor conditions where this screen suffers. I will cover that when we go over the buttons.

Vaporesso Revenger X Kit Review

Right below the screen on the Revenger X, we have the plus and minus button as well as the menu button. The plus and minus buttons on this mod are a little different than most. For all intents and purposes, the buttons are touch screen buttons. They have a haptic feedback to them and in dark conditions, it can be extremely difficult to see them. Most of you know that I am a bartender by trade. I’ve been using this mod a lot but because of the limitations when it comes to being able to see the buttons in low light conditions, I have not been able to use this mod at work. Most bars have a low lighting to begin with and this mod is almost impossible to see in those types of conditions. Not the screen itself but the actual buttons. Vaporesso made the buttons the same color as the screen with no back lighting to them.

On the right of the screen, you will see an arrow pointing towards the right, that is your plus button. On the left of the screen, you will see an arrow pointing towards the left, that is your minus button. In between the two buttons, slightly above the USB port, you will see a gear symbol. That is your menu button. All three of the buttons are basically the same color as the glass. If you are not in lighted room, they are extremely difficult to see. They do work rather well but you have to be able to see them first.

The screen on the Revenger X does have an automatic locking feature to it. Since this is a touchscreen, as soon as you hit the fire button, it locks up all of the other buttons. This way, you are not adjusting the mod inadvertently while you’re vaping. It’s absolutely pure genius and it works really well on this mod. In order to get to your adjustments, you have to click the fire button 3 times to unlock the screen. Simple, and extremely effective. When the screen goes into sleep mode, the Revenger X will display a beautiful clock. I love this feature and I love mods that have clock faces in sleep mode. I think it’s just an awesome addition to an already beautiful mod and I wish more mod manufacturers would do it.

Focus On www.urvapin.com For More Vape Start Kit.

THE TANK:

The tank included in the kit is the Vaporesso NRG tank. It is the same exact tank that comes in the original Revenger kit with one difference. This tank does not have the spit back guard on the stock drip tip. The tank is very reminiscent of the Smok Big Baby Beast. That is what it reminds me of when I look at it.

Vaporesso Revenger X Kit Review

The drip tip is made of delrin. There is only one drip tip in the kit but there is also a 510 drip tip adapter. So you can run all of your traditional 510 drip tips. The stock drip tip is a wide chuff cap style drip tip. It also has o’rings around it even though it is an 810 style drip tip. The drip tip is nice and comfortable. All my Smok Beast line drip tips do fit on my NRG tank.

Vaporesso Revenger X Kit Review

The top cap is a slider-style top cap. There is an arrow indicator on one side of the top cap. Simply push the top cap towards the arrow and the top cap slides up and slightly to the left. This will reveal one kidney bean-shaped fill port with a gasket around it. The fill port is a decent size but it could get a little messy with a bullnose type of juice bottle. Droppers and needle nose bottles will have no problem at all. The tank will hold 5 mls of juice.

Vaporesso Revenger X Kit Review

The chimney on the NRG tank is a wide bore chimney and it is very short. It screws directly into the top of the coil head. So, the vapor does not have a long way to travel before it hits the vapers mouth. I’m sure this contributes to the excellent flavor the NRG tank is capable of.

Vaporesso Revenger X Kit Review

The base of the NRG tank is a screw-in style base. In other words, you screw your coil heads directly into the base of the NRG tank. The threading on the inside of the base is very smooth and all of the coils have fit into the base securely with no leaking. Around the exterior of the base, there are two air slots.

This is a pretty airy tank and again I would compare the airflow to the Smok Big Baby Beast tank. The AFC has a smooth action to it and stoppers on both ends. One of the innovative things Vaporesso did with the base of the NRG tank was that they made it out of Delrin. I like that Vaporesso tried something different with the base and to be honest, it actually works very well. The Delrin base of the NRG tank definitely helps lessen the effect of heat transferring between the mod and tank. On the bottom of the base, there is some NRG branding. There is also a non-adjustable 510 pin with some smooth threading done in stainless steel.

THE COILS:

Because I received a very early pre-release version of this kit, I only received one coil in my kit. I have spoken to Vaporesso about this and they ensured me that the two coils that I listed in this review will indeed be included in your kit.

Vaporesso Revenger X Kit Review

The coil I was sent is the Vaporesso GT8 coil. This is a .15 ohm coil with a rating of 50 to 110 Watts. Vaporesso says that this coil is best between 60 and 80 Watts. I tend to run this coil right around 85 Watts. I have vaped it at 110 watts and it does do a fine job of keeping up especially while chain vaping. I just find that at 110 watts, it’s a little too warm for my liking. The overall quality of the coil is just fantastic. I get a really great, flavorful, saturated, cloudy vape from this coil at 85 Watts. That is exactly where I like to be with this coil and how I like to vape.

Vaporesso Revenger X Kit Review

While Vaporesso has developed a nice family coils for this tank, this tank is also compatible with Smok Baby Beast coils. In my book, that’s a definite plus. I really do like when manufacturers come out with tanks that are capable of using other coil systems. I think the more varieties that we are offered, the better off we are as a community. I take my hat off to Vaporesso with doing that. They do have five coils available for this tank in their own family of coils. Combine that with all of the Smok Baby Beast compatible coils on the market and you have yourself quite a few choices as far as coils go for the NRG tank.

THE LOOK, FEEL, AND GENERAL AESTHETICS OF THE MOD:

As most of you know, from reading my original Revenger kit review, I love the look of this kit. I just think it has a unique look in a very competitive subcategory. I like the glossy look of it and the smooth texture of the mod. It looks like it’s made out of glass. I also like the form factor on it. It’s not just your run of the mill box. It has curves and contours around the edges and corners that give it a very comfortable feel when it is in your hands. Just a fantastic job by Vaporesso. While I do like the overall look of the mod, I really wish they would have done something different with the buttons. It is an improvement over the original Revenger kit, because of the increased functionality, but not being able to see the plus/minus buttons as well as the menu button in dark conditions is a definite con.

Vaporesso Revenger X Kit Review

The good news is, Vaporesso seems to be listening to their customer base because they corrected a lot of things on this mod that were wrong with the original Revenger kit. Hopefully, they’ll listen when it comes to the buttons and either use a different color on the touch screen buttons or some sort of background lighting on them. I think that would easily solve that problem. Big props to Vaporesso for taking the constructive criticism on the original Revenger kit and more importantly, actually acting on it. Nice job, Vaporesso. The Revenger X kit comes in blue, red, green, black, and rainbow.

THE BOARD:

The chipset inside the Revenger X kit is a proprietary Vaporesso chipset. It is the new Omni board version 2.2. This is a really good board as far as accuracy and TC go. It does have a full temperature control suite. It will TC Ni, Ti, SS. There is a TCR function for all of your custom wires with 2 presets. It even has a variable wattage curve feature.

This board also has a feature that I really like. It has its own Smart Mode. What that means is, if you turn the smart mode on, every time you attach a new atomizer, it will read the resistance automatically and give you a suggested wattage to run that atomizer at. I think that is a fantastic feature for new vapers. Most of these new vapers that are starting off have no idea where to start when it comes to resistance and the wattage that they should run. This feature on this board, gives those new vapers a great starting point. It does err a little on the conservative side but that’s okay. You have the ability to turn it up or down from that point. I also like the fact that you can turn this feature off on the mod. I know a lot of experienced vapers may find it annoying, so to be able to turn it off is a definite plus.

Vaporesso Revenger X Kit Review

For the real experienced users, it even has a bypass mode so you can run the mod like a Mech mod. There is also a wattage curve feature. Personally, I haven’t really gotten into the whole wattage curve thing. For the purposes of this review, I did test it out and it does work beautifully. I know that a lot of vapers are really getting into the wattage curve features on a lot of the new mods that are coming out. For me, it’s just not my thing. I would just rather run the board in TC mode. Basically, this board has something for everyone from the TC vaper, to the newbie, to the diehard power mode users, to the wattage curve vapers and the experienced Mech mod users. Plenty of options for everyone.

Vaporesso claims that the mod is capable of firing as low as 5 watts and as high as 220 Watts. We will test that out a little later. The Revenger X kit has a temperature control range of 200 degrees to 600 degrees Fahrenheit. The screen has a 16-tier brightness adjustment to it and the mod includes a haptic feedback motor.

THE MENU SYSTEM:

The menu system on this mod is just beautiful. Vaporesso really did an awesome job of taking the feedback that they received on the original Revenger kit and basically going back to the drawing board. They have fixed everything that was wrong with the original kit. The original Revenger had an archaic menu system. Especially, if you factor in the fact that it has its own separate menu button. When you include a button like that, it should make the clicks much easier and the menu system should be much more intuitive. That was nowhere near the case with the original Revenger kit. Don’t get me wrong, it’s a good mod but the menu system absolutely ruined it. Vaporesso listened to all of their customers and they came up with a winner here as far as the menu system goes.

The menu system on their Revenger X is basically as simple as it gets. First of all, the screen automatically locks when you hit the fire button. On a touchscreen, that is an awesome feature to have so you do not inadvertently make adjustments while you are vaping. In order to unlock the screen, you simply click the fire button 3 times. Once you do that, you are free to make any adjustments you would like.

With the screen unlocked, if you want to adjust your wattage or temperature, all you have to do is hit the menu button and the main menu comes up on the screen. Once the main menu is on the screen, you use your plus and minus buttons to scroll through your choices. When your choice is highlighted, you simply hit the menu button and make whatever adjustments you feel you need to make. That’s the whole menu system in a nutshell. It’s very easy and it is extremely intuitive.

HOW DOES IT VAPE?

The Vaporesso Omni board has received a lot of praise and rightfully so. It’s a very good board. It is very accurate in TC and in power mode, it is accurate up to a certain point. As you all know, one of my pet peeves is I hate when companies over rate their mods. Most of us know that a dual 18650 mod is just not capable of doing 220 watts. If it is, it can only do it for a few pulls. I did test the Revenger X kit against my triple battery DNA mod. As with most dual 18650 mods, it did not feel anywhere close to how the DNA felt at 220 watts. I would say, this mod maxes out at around 175 watts, at best. Again, I just wish companies would put honest wattages on their packaging. It’s not like I’m going to choose one mod over the other because it does 20 or 30 more watts than another mod. That’s not the way I make my decision when I buy a mod and I’m sure that’s not the way most vapers make their buying decisions.

All that being said, power mode up to 170 watts is accurate as far as I’m concerned. The Revenger X is very accurate in TC mode and I love the different preheats that they give you in both power and TC mode. I find myself using those preheats a lot in order to push some of my bigger coils. The Revenger X has 3 preheat settings. The choice is soft, normal, and hard. Most of the times, I am running in normal mode but I do find the hard preheat useful when I am pushing some big, fat coils.

Overall, the vape quality on this kit is just fantastic. I love the board and I think, the tank is really good as well. Even though I only received one coil in my kit, I’m glad that they sent me the GT8 coil because out of all the coils that I have tried from Vaporesso, that one is by far my favorite. It’s a really solid performing mod with a very solid tank. Combine the two and that makes this a really sweet kit.

WHAT WOULD MAKE IT BETTER:

  • Backlit Or Colored Buttons

There is really not a lot wrong with this kit. I think Vaporesso did a bang up job on it. Especially when you compare it to the original Revenger Kit. They took everything that was wrong with that kit and basically fixed it. Good for you, Vaporesso. The one place where I think that they dropped the ball just a little bit is with the touch screen buttons. If you are in a dark room, they are impossible to see. Vaporesso, if you are reading this, do something with these buttons. Either put a light behind them or put some type of different color on them, something to make them more visible. Anything other than a lit room and you are going to have a hard time seeing those buttons. They do work well. I have had no issues with the buttons except for the fact that I can’t see them in low light conditions. Fix that Vaporesso, and you are going to have one very hard to beat mod in an extremely competitive subcategory.

CONCLUSION:

If you’re a fan of the original Revenger kit but that archaic menu system turned you off, then you are just going to absolutely love what they did with the Revenger X kit. This thing is absolutely everything the original Revenger kit should have been. It is extremely easy to use, it looks fantastic, you have a centered 510, and the menu system is easy and intuitive. What more does somebody want from a kit? This is it, this is just an all-around great kit. It’s great for the newbies out there that may not know where to start off. If you are a new vaper, then buy yourself this kit and turn on Smart Mode. It’s great for the experienced users because it has enough bells and whistles to keep them happy. It’s just an overall solid performer. DeucesJack approved for sure, especially if you’re a fan of the original Revenger kit. This one blows the original out of the water.

Now It’s Available :

Vaporesso Revenger X 220W Kit with 5ml NRG Tank

Hot Sale Recommendation:

smok novo

dovpo topside

smoant naboo

Hellvape ReBirth RDA

Uwell Crown 4 Kit

ijoy shogun kit

ijoy shogun univ

ijoy shogun mod

smok stick v9

SMOK OSUB Plus Kit Review

smok-osub

The SMOK OSUB Plus Kit comes with a top quality sub-ohm tank paired with an internal battery-powered mod device. SMOK has named the top piece the “Brit Beast Tank” and the internal battery device as The OSUB Plus TC Mod.

As most Vaping Mods typically have removable 18650 lithium-ion batteries, in some cases the batteries are 26550. Most take a single 18650 battery, but through much innovation, there are many more being designed as double battery devices with the ability to hold two 18650 batteries. Not to mention, with the release of the Reuleaux, we began to see a rise in popularity for triple battery devices, housing up to three 18650 batteries. This is why the OSUB Plus TC Mod manufactured by SMOK is so unique, it requires no inserting and removing of lithium-ion batteries, the mod itself is the battery and a quite powerful one in fact.

Each SMOK OSUB Plus kit comes with:

  • 1x OSUB Plus 80 W TC Mod
  • 1x Brit Beast Tank
  • 1x V8 Baby Q2 Core (0.4Ω no dual coils) (Pre-Installed)
  • 1x V8 Baby Q2 Core (0.4Ω no dual coils)
  • 1x Micro-USB Charging/Upgrading Cable
  • 1x Replacement Glass Tube
  • Spare Parts Mini Bag

OSUB Plus TC Mod

smok-osub-2

The OSUB Plus TC Mod has a 3300mAh internal battery which powers up this particular device, reaching up to 80 Watts and 0.8V-9.0Volts, a vast improvement from the original OSUB Kit, literally doubling the power, which was previously only 40 Watts. The Plus Kit version is equipped with temperature control mode ranging from 200 degrees F – 600 degrees F or 100 degrees C – 315 degrees C. The resistance ranges from 0.1 ohms-3 ohms (VW) and 0.06 ohms-2 ohms (TC).

Altogether, it was crucial to highlight the popular double-to-triple battery Mods since, at first glance, vapers might think the OSUB Plus TC Mod is a double-battery device – I certainly held that predisposition when first laying my eyes on this sleek, innovative new SMOK product.

3300 mAh battery capacity

An INPUT 5V:1A port is located directly below the “+” and “-” buttons beneath the OLED screen. This allows for the OSUB TC Mod to be rechargeable while also possessing the ability for upgradeable firmware all simply from utilizing a Micro-USB Cable – a cable is provided for the consumer as part of the box contents.

The most distinct portion of this specific Mod that seems to make it stand-out as one-of-a-kind is that it features an integrated streamline, big lateral firing key located on the opposite side of the 510 thread where the Brit Beast screws in. The OSUB Plus TC Mod measures at 75 x 25 x 54.5mm.

The best part about the fire key is that it takes up only half of one side. So if you press towards the bottom it won’t fire, you’ll just be pressing against a solid surface, but when you press the top portion, it will make a smooth click sound, powerup the coil and you can then begin or continue to Vape. Therefore, this particular feature is somewhat similar to the X-Cube Mod except the fire button does not take up the whole side portion of the Mod, only the top half of it.

The colors available for the internal battery mod device that is the OSUB Plus TC Mod comes in Black, Stainless, White, Blue, or Red. Not to mention, at the very bottom of the OSUB Plus Mod, there is a tiny hole used as a “reset” button, accompanied of course by a set of five mini ventilation holes on each bottom side.

Taking all that has been revealed about the OSUB Plus TC Mod, the most fascinating, convenient and innovative features are present in the settings, visible on the OLED screen. After turning on the device with 5 rapid clicks of the fire key, you will be greeted by the SMOK logo, then “OSUB TC” appears on the screen, followed by a big and bright “Welcome.” To get to the settings, all that is required is to click the fire key 3 times, rapidly and there will be a series of icons.

menu2

From left to right, the fist icon is for changing it to Temp. Control Mode or Wattage Mode, then under the same icon you are given the ability to change the “Drawing Effect” strength from MIN, SOFT, NORM, HARD, or MAX. Vaping this device at 45-50w on NORM is fairly powerful, so it’s difficult to imagine that any vaper would need the MAX drawing effect while on 80w.

Regardless the very next icon is the “Vape Data” which is basically a puff counter that reveals the puffs already taken, while allowing you to also set a limited number of puffs as well as a rest of the puff counter. Following this, the very next icon is for adjusting initial ohm.

The Fourth icon over will be for the Temperature Coefficient of Resistance (TCR), offering the ability to adjust the resistivity of your coil, whether Ni200/Titanium/Steel. After this, the 5th icon is of a settings wheel we’ve all seen before (often seen in modern technology applications). This specific icon can take you to another sub-menu which includes the option to choose “Stealth Mode” as ON/OFF as well as screen-saver-time, allowing up to 240 seconds of time on the OLED screen remaining lit-up.

You also have the option of adjusting “Contrast Range” from 5-100. Additionally, there is an extra decision for you to make and that deals with if you want to rotate the screen in 180 degrees. After the “sub menu” you can then choose the power ON/OFF icon followed by the next icon, representing “Exit Menu.”

Focus On www.ave40.com For More Vape Kits.   

OLED screen options & commands

menu

After reading about all the special Setting Menu features, it might seem like a lot of information to take-in all at once. Absorbing all that information about the features, certainly seems like overkill, so it is indeed overwhelming initially. However, in the near future of becoming more familiar with the device, it is so much more convenient than some may think.

The Settings features are by far what sets this Mod apart from the rest. It is largely significant to mention that it is very easy to quickly lock and unlock the device. This is very beneficial since the fire key can easily be pressed on accident while in your pocket or purse or wherever you store your Mod(s) on your person. To Lock/Unlock, simply press the “+” and “-” buttons together simultaneously or click the fire key 5 times rapidly.

Brit beast tank

img_1141

With compliments to The OSUB Plus TC Mod, The Brit Beast Tank is equally impressive. The Brit Beast is comparable to a TFV8 Baby tank, barely a mere mini version of the Baby TFV8 tank made by SMOK. The Big Brother to each of these tanks is that of the TFV8 Cloud Beast tank, which holds 1/6th of a 30ml bottle of eLiquid with a 5ml capacity. The TFV8 Cloud Beast tank is probably one of the most popular tanks on the market as coils are scarce at vape shops around the Denver area.

Regardless, the Brit Beast has bottom airflow with a removable airflow ring for cleaning purposes. It is of course a top-fill tank with wide juice filling slots that has a capacity of 3.5ml, which is still going to provide you with a nice full tank. Filling it up all the way directly after priming your coil may produce some spitback. So, perhaps wait until your cil is nice and saturated before you fill it to the tippy-top.

To refill, simply unscrew the chuff cap drip tip (the only compatible drip tip for the Brit Beast). The Brit Beast Tank is made from Stainless Steel and is compatible with all cores of the TFV8 Baby tank – it’s an advantageous discovery to learn what is possible when the Brit Beast tank meets with the 0.4Ω V8 Baby-Q2 Core.

The possibilities are quite helpful since the Brit Beast core is compatible with all cores of the TFV8 Baby Beast. Very convenient. The Brit Beast measures in size at 24.5mm x 43mm and weighs 39 grams.

In Summary

Advantages (pros)

  • The Plus Kit comes with a very lightweight & compact TC Mod with a comfy grip
  • Tank Produces Smooth Flavor & Strong Cloud Production
  • Special Personalized Preference Features
  • Adjustable Drawing Effect from MIN-to-MAX
  • Removable airflow ring for easy cleaning
  • The location and feel of the fire key
  • Chuff cap drip tip for wide-bore experience during the fire and draw
  • 3300mAh Internal Battery for a long power-life
  • Various Settings Menu Options

Disadvantages (cons)

  • The removable airflow ring could also be seen as a possible disadvantage as there are instances where it has had issues with leaking.
  • It is reasonable to suggest some vapers may not appreciate the chuff cap since there is no other compatible drip tip – while many prefer the wide-bore mouthpiece, others may want the versatility of switching out the chuff for a 510 drip tip.
  • Some believe the airflow creates an undesirable noisy sound, but that is only if you’re sucking on it so hard as if the antidote was in it. The “Drawing Effect” adjustment will do the work for you.
  • One of the features of this kit that could be categorized as being an advantage to some vapers as well as a negative aspect to other vapers is the 3300mAh internal battery. The internal battery may be considered a “con” due to the fact that many vapers tend to prefer devices that take 18650 batteries. This is due to reasons related to traveling through airport security as well as the overall functionality, longevity and stability of power retained by the device.

Reflection

Many may ask, why would this be an issue when traveling through airport security? Stories have been told by some Vapers that when 18650 batteries are taken out of a device and stored properly, then this is far more beneficial for a vaper when having your belongings scanned and analyzed by airport security. Some vapers have said they were forced by TSA to throw-away their internal battery Mods while passing through the security line. Therefore, it is recommended by many vapers, that if you’re traveling and passing through TSA, take devices with batteries you can remove.

For instance, most advanced vaping devices or Vape Mods take either 1 to 3 18650 lithium-ion batteries. If you take them out, secure them in a protectable case, then your mod won’t accidentally turn on without your knowledge persay. To most vapers, there is truly not much of a difference when it comes to traveling from airport to airport with vape devices, yet many have retold stories of their beloved internal battery Mod being confiscated or transformed into instant-garbage as it’s tossed in the trash can. Not cool. So, be careful.

The scariest thing is not the batteries, it’s the lack of knowledge that non-vapers have regarding such technology. Regardless, better safe than sorry. Take out your 18650 lithium-ion batteries or if they’re 26650 batteries, doesn’t matter, just take them out and leave the internal battery mod at home – this would be typically recommended. Then again, we all talk to different vapers, perhaps in your own experience, this seems unlikely or unheard of. Rest assured, it is more than likely and has been heard loud and clear, so don’t take any risks.

Final thoughts

The advantages certainly outweigh the disadvantages when it comes to to this particular vaping device kit. This OSUB Plus Kit would not be recommended for beginners, perhaps the first initial OSUB 40w device with a Helmet Tank would be more suitable for beginners. Yet, if you’ve been Vaping on the pens for quite some time and you’re ready to transition to a Mod device, this is a perfect kit for your transition.

So, whether you are somewhat new to vaping, for instance, you are long past the cig-a-like stage or whether you consider yourself more of a veteran vaper. Millions would classify themselves as veterans if they are actual vaping hobbyists, vapor enthusiasts or vape advocates. Hence, when it comes to describing the veteran vaper – your lifestyle would most likely consist of one of these combinations: nothing but Sub-Ohm tanks or RDAs, filling either one with Premium eLiquids ranging from 2 to 4mg nicotine levels, typically 3mg nic for as long as one or two years. Regardless The SMOK OSUB Plus Kit, whether post cig-a-like vaper or veteran vapor, this one is a MUST-Get. I repeat, The SMOK OSUB Plus Kit is a device you MUST-get!

Now It’s Available :

SMOK OSUB 80W Kit With TFV8 Baby

Hot Sale Recommendation:

smok novo

dovpo topside

smoant naboo

Hellvape ReBirth RDA

Uwell Crown 4 Kit

ijoy shogun kit

ijoy shogun univ

ijoy shogun mod

smok stick v9

SMOK ROLO BADGE REVIEW

FIRST IMPRESSION OUT OF THE BOX

DeuceJack: What’s up everybody? DeucesJack and I’m back with another review. Look at this thing. Iy’s the Smok Rolo Badge. It looks like a badge. It looks like something like Doctor Spock or Captain Kirk would wear on their uniform. Kind of wacky looking, huh? Almost reminds me of the Suorin. What was that? The drop that they did but instead of having the drip tip, they put the drip tip almost on the bottom of the shape where the Suorin’s drip tip was over here. I don’t know, man. But it’s nice. It’s nice and slim. Really easy to hold.

Check out the vape. It’s got a really nice draw on it. I’ve been running some Nic Salts in it. I’ve been running this Black Unicorn Nic Salts, the grape. It kind of taste like a grape candy, like the Grape Now & Later. Really nice in here. I’ve been enjoying it.

Let’s cut down low. Let’s look at it up close and personal then we’ll come back on top. We’ll talk about it a little bit, vape it, pros, cons. We’re out of here. See you down low.

WHAT’S IN THE BOX

  • 1 x SMOK ROLO Badge AIO Vape Pod Kit
  • 2 x SMOK ROLO Badge Cartridges
  • 1 x MicroUSB Cable
  • 1 x E-liquid Injection Bottle
  • 1 x User Instruction Manual

Smok Rolo Badge Review

All right everyone, welcome down low to the Smok Rolo Badge Pod System. This is the packaging that it comes in. You can see all the stuff over there. Scratch and sniff, sample, not for sale. There you go. And there is the back right there. What’s included with this device is one Rolo Badge, 2 pods, a USB cable, a user manual and an E-Liquid injection bottle.

Let’s open it up. See what we have here. Put that cardboard to the side there. Let’s get this box open. There we go. Good looking mod. This is the battery part. This, of course, is the pod part. Let’s put it together like that for now. Let’s put it to the side.

See what we have underneath. Take the foam insert out, cardboard out. We have a spare pod. Let’s put that to the side. We have a USB charge cable. We all got a million of those. Let’s put that to the side. We have a needle nose fill bottle with a silicon cap on it. I think that’s a really nice touch. I like that. I’m digging that, I’ll tell you that. That’s a nice touch to be able to carry this around and fill up your pod. I like that. Silica, and here we have the owner’s manual. There you go. Let’s file all that to the side.

FROM TOP TO BOTTOM

Let’s take a look at this pod right here. I’m going to use a clean one for demonstration purposes. As you can see, we have two rubber grommets here. If you’re using a regular bottle tip, you might want to open another side up in order to let the air escape but if you’re using one of those needle nose injection that’s included, you only need to open up one side, stick the needle nose in there and fill it up.

Smok Rolo Badge Review

This thing holds 2 mls of liquid but I have to say, when I filled it up, it felt like it held a little more. More like 2.5. There’s your drip tip right there. That’s it for the pod system.

Now, here’s the battery part of it. This thing’s a fingerprint magnet. It really is. But it’s a nice looking- it does look like a badge. Kind of looks like a Star Trek badge. Don’t get any ideas right there. I’m no Trekky. But really nice looking pod system. It really is. I think they did a good job with it. I’ve been rocking this for quite some time. It’s slim, it ’s compact, easy to put in a jacket pocket or jeans front pocket. I like it a lot.

Smok Rolo Badge Review

When you take the pod out, you’ll notice that we have a negative and positive gold plated contacts here and magnets that coincide with magnets on the actual pod. It clicks in rather nicely.

One thing I wanted to go over about this Rolo Badge is, the slim form factor is one thing but one thing I really like there is the USB port right there. It’s a regular micro USB port, no fancy docking station or anything like that. I really like that. I think that’s always going to be a pro on pod systems. I hate these proprietary charging systems. Good job on that Smok or Smoke, whatever you want to call them.

Smok Rolo Badge Review

The other thing I wanted to show you is, the shape is very similar to the Suorin Drop. The only difference being, instead of having the mouthpiece on the pointy part like it is on the Suorin Drop, it;s on the more flatter side on the Rolo Badge. I’m not too sure how I feel about that. I think I might have liked the drip tip to be on this side. I think that might have been better but then it would have been almost the total copy of the drop. Either way, they’re both really good form factors. This thing does vape really nice and it gives you a satisfying vape.

Let’s cut back on top. Let’s go over cons, pros and then we’re out of here as usual. See you back on top.

Focus On www.ave40.com For More Vape Kits.   

GENERAL THOUGHTS

All right, we’re back with the Smok Badge. Look at that thing. Kind of nice looking, man. I got to say, I really dig the capacity on this thing. It says that it takes 2 mls of liquid but it feels like a lot more when you’re filling it up. I think it’s a little more than that. I think they were real conservative. It has an output of around 7 to 12 watts, gold plated contacts like the Infinix and the Fit Kit. it has magnets on the bottom of the pod system, draw activated, made out of zinc alloy. It has a nice solid feel to it. I gotta say I’ve been enjoying this. Easy to slip into a back pocket, front pocket, shirt pocket. It’s pocketable, slim, I like it. I really do. I’ve been enjoying this one.

CONS

As far as the official cons and pros go, I wish they would have told me what type of resistance range the coil is. I can’t seem to find that anywhere.

And the shape. The shape of this thing may not be for everyone. Yes, it’s the same shape as the very popular Suorin Drop except with the Suorin drop, the mouthpiece was on this side but it’s definitely the same type of shape. It’s not going to be for everyone. Some people who like those slim long ones, they’re not going to like this chubby slim one. They may not like the shape.

That’s it as far as the cons go. It doesn’t affect the vape ability of it.

PROS

Pros are going to be, love that needle nose bottle that they put in their kit. Smok has been doing it with all their pod system.

I think that’s great. I think it runs Nic Slats really well. It’s great for Nic Salt juices. We’ll give them a pro for that.

We’ll give them a pro for the pocketability. I like that.

I’m also going to give them a pro on the vape quality. I got a really nice satisfying vape on this pod system. It’s really good. I’ve been enjoying it.

The other pro I’m going to give them is, I love the tolerance on the pod system here. The way the pod actually clicks in to the battery pod of the mod, they did a great job with that. The fit of it is perfect.

I also want to give them a pro on the finish. As you know, if you’ve seen my Infinix and my Fit Kit review, those finishes, they didn’t hold up that well in my pocket. I jostle this one around and treated it the same way and put it in the same types of pockets and bags. This finish has help up really well. I’m very very impressed by that Smok or Smok, whatever you gus want to call yourself, you did a great job with it. You really did.

OUTRO

We’re going to have links down below where you can purchase the Smok Rolo Badge. Make sure you check it out. We’ll also have links down below for the Black Unicorn, the Grape and check out their whole line of Nic Salts. They do a great job. Grape and strawberry are fantastic. The mango was really good too.

Now It’s Available :

DRAGON Rolo Badge Starter Kit

Hot Sale Recommendation:

smok novo

dovpo topside

smoant naboo

Hellvape ReBirth RDA

Uwell Crown 4 Kit

ijoy shogun kit

ijoy shogun univ

ijoy shogun mod

smok stick v9